07-14-2017 12:54 AM - edited 07-05-2021 07:20 AM
hi all
we have a query that is cisco airnot 2802i-D-K9 comes with mobility express or we need to upgrade the OS in that?
07-14-2017 01:15 AM
console and found it!!!
To determine if your AP has a Cisco Mobility Express image or CAPWAP Lightweight AP image, Check this link:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guide/getg_start.html
Regards
Dont forget to rate helpful posts
07-14-2017 01:33 AM
ours is CAPWAP. It will work on the Mobilty Software?
07-14-2017 01:55 AM
yes it will.
info: On 2800 and 3800 series Access Points, Mobility Express is supported starting Release 8.3.102.0 so they must have 8.3.102.0 CAPWAP image before they can be converted to Mobility Express. If the CAPWAP image on the Access Point is prior to 8.3.102.0, Access Point MUST first join a WLC running 8.3.102.0 or higher to upgrade its CAPWAP image. After the CAPWAP image of the AP has been upgraded, conversion of AP from CAPWAP to Mobility Express can be performed.
Check link to convert:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_Mobility_Express_Deployment_Guide/b_Cisco_Mobility_Express_Deployment_Guide_chapter_010.html
Regards
Dont forget to rate helpful posts
07-14-2017 02:12 AM
Thanks for your valuable reply..
07-14-2017 02:17 AM
If you are satisfied with reply then plz also mark it as answered. It may help others.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide