cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4801
Views
9
Helpful
3
Replies

Cisco Aironet 1240 AG Access Point - configure Mac Address using Telnet

admin_2
Level 3
Level 3

Hi there,

IÂ’ve got a problem hopefully someone can help me with. I have the above mentioned AP and it is configured, working well and providing wireless access to several laptops on our domain.

The thing is I canÂ’t get access to the web-based interface to add new laptops Mac addresses to the AP as I currently have them secured with local list Mac address authentication but my user name and password when entered in the web browser login dialog box wonÂ’t allow me in although strangely it does allow me to login using the same credentials when I telnet into the AP.

Does anyone know why I canÂ’t get logged in using the web interface even though the user name and password does appear to be correct as I can telnet in? Also if you have any suggestions how I could sort this without having to perform the password recovery procedure, as I donÂ’t want all the config on the AP wiped and want to avoid having the set the whole thing up again.

As I workaround if anyone knows what the commands are to allow me to add the Mac addresses of the new laptops so they are added to the local list Mac address authentication list so the new laptops are secured that would be great.

Thanks in anticipation,

Tony

3 Replies 3

jeff.kish
Level 7
Level 7