I recently deployed a cisco 1300 airnet ap/bridge to slove a conectivity problem with are companys laptop users in a remote bldg approx 410feet from the main bldg,i first used the 1300 with the intergrated 13dbi antenna,(poor /weak signial)so i then ordered the 1300 with the external ant port,and used the 5.2dbi omnidirectional mast antenna,and my signial is still very weak /poor for such as close distance from the ap?any clues would be a blessing,ive double checked my inital config settings,and they appear to be ok, im using this ap connected to a simple router (it to is a cisco product mfg by linkys #WRT600-N also a wirless unit,the only thing im wondering is ,could it have something to do with the radio still being on in the wrt600-n,causeing a conflict somehow??i pluged my ethernet into the spare port on the linkys unit to give the 1300 the internet,and within a 300 ft range the cisco 1300 unit performs well with signal readings on my laptop good to execelent?,so im sorta confident the 1300 is setup properly?anyone have any ideas,or should i give up the wireless idea to allow seemless usage of laptops to our netwrk,? and bury a 2 inch conduit with a cat 5 cable to connect the problem bldg,I look foward to any hints or possibile ideas as a way to slove my wireless connectivity issues,thank you in advance