Cisco Aironet 1815T primary and secondary controller

[craiglebutt]

Hi

Looking at the Cisco Aironet® 1815T, from what I've read only supports 1 NAT so only 1 WLC.

So would only point to 1 WLC in HA, with this mind, could you use a loadbalancer for extra resliance to get the 1815T to join the network?

Cheers in advance

[Rasika Nayanajith]

You can configure "primary", "secondary" and "tertiary" WLC information for a given AP. Given AP only can be registered with a single WLC given time, if that WLC fails, it will go & register to secondary WLC.

HTH
Rasika
*** Pls rate all useful responses ***