07-16-2021 10:14 AM - edited 07-16-2021 11:32 AM
We have a Cisco Aironet 1832i access point. It has 8.2 firmware version and we tried to update to 8.10. Is it possible to update from 8.2 to 8.10 directly?
07-16-2021 04:03 PM
If you are referring to the AP only yes it is possible. You can download the code from Cisco software portal and upload to the AP using tftp, as I can remember this code supports only tftp. You need to have console access to the AP as well.
archive download-sw tftp://<path/filename>
But if you have a controller the process might differ, if this is the case you can post your controller information+Ap models managed by WLC to provide further info.
07-18-2021 04:22 AM
For WLC check the guide in the release notes https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn810mr5.html#upgrade-software
For Mobility Express https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/user_guide/b_ME_User_Guide_810/getg_started.html#task_7588F4C009744AEFBB9EB754A713E390 or https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/user_guide/b_ME_User_Guide_810/appendix.html#task_330D7AD89F974001BEF10985059485DF
ME can be very temperamental so may be better/easier to convert back to standard CAPWAP AP then upgrade to new ME code.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide