12-09-2014 02:07 PM - edited 07-05-2021 02:06 AM
Hi guys,
I was wondering if the autonomous IOS for the Cisco Aironet 3700 series is fully functional, instead of only supporting the site-survey mode.
Many thanks.
Solved! Go to Solution.
12-09-2014 04:00 PM
No, it is fully supported in Autonomous mode & you can use the below image to test it out
ap3g2-k9w7-tar.153-3.JAB.tar
HTH
Rasika
**** Pls rate all useful responses ****
12-09-2014 04:00 PM
No, it is fully supported in Autonomous mode & you can use the below image to test it out
ap3g2-k9w7-tar.153-3.JAB.tar
HTH
Rasika
**** Pls rate all useful responses ****
12-09-2014 05:19 PM
Thanks man.
I saw that IOS on Cisco's site too.
https://software.cisco.com/download/release.html?mdfid=285029866&flowid=48543&softwareid=284180979&release=15.3.3-JAB&relind=AVAILABLE&rellifecycle=ED&reltype=latest
However, I wasn't sure it fully supports it.
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide