10-30-2014 04:42 PM - edited 07-05-2021 01:50 AM
Hello;
I have a CISCO Aironet AP 1600i with an Autonomous IOS & a Motorola HandHeld MC3190 runs Windows Mobile 6.5 Classic.
I tried to connect the HandHeld with the AP but failed, It keeps trying to connect but with no success..
Do you know how can I fix this issue, please?
I am really lost!
10-30-2014 05:39 PM
Hello Mounir,
Is it only Motorola HandHeld MC3190 that doesn't connect?
Did you try any other device?
For configuration please refer: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3.html
10-31-2014 01:41 AM
Yes, only Motorola HandHeld MC319ZEU (I tried 2 of them same Issue). It Is the only device that runs Windows Mobile 6.5 Classic. The other devices are fine (Android, Windows 7, Windows 8 "PC").
10-31-2014 01:03 PM
Hello Mounir,
What authentication are you using to authenticate clients?
Try to keep it to Open Authentication and share results.
Thanks.
10-31-2014 02:40 PM
10-31-2014 04:41 PM
Pls attach your AP configuration to have a look
Rasika
11-01-2014 07:20 AM
Hello guys;
Here Is screen captures of the AP's Configuration:
11-01-2014 01:17 PM
Pls access the AP vial CLI & get the "show run " output in text file format. That is easy to read & understand how it configured.
HTH
Rasika
11-01-2014 03:02 PM
Hello;
Here Is the output text:
CiscoAP1600i>en
Password:
CiscoAP1600i#show run
Building configuration...
Current configuration : 1779 bytes
!
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname CiscoAP1600i
!
!
logging rate-limit console 9
enable secret 5 $1$j7Lx$Xsw7dDi8Mva4nb9FuUgwq0
!
no aaa new-model
no ip source-route
no ip cef
!
!
!
!
dot11 syslog
!
dot11 ssid Cisco2
authentication open
guest-mode
!
dot11 ssid Cisco5
authentication open
guest-mode
!
!
!
!
!
username CISCO password 7 096F471A1A0A
!
!
bridge irb
!
!
!
interface Dot11Radio0
no ip address
!
ssid Cisco2
!
antenna gain 0
stbc
beamform ofdm
station-role root
no dot11 extension aironet
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio1
no ip address
!
ssid Cisco5
!
antenna gain 0
peakdetect
no dfs band block
stbc
beamform ofdm
channel dfs
station-role root
no dot11 extension aironet
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface GigabitEthernet0
no ip address
duplex auto
speed auto
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
!
interface BVI1
mac-address fc5b.3937.1604
ip address 192.168.1.3 255.255.255.0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
!
ip default-gateway 192.168.1.1
ip forward-protocol nd
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
transport input all
!
end
11-01-2014 04:06 PM
Did you try with different IOS version to see the behavior is same ? I would do that as configuration is pretty basic,cannot think of any issues with that
HTH
Rasika
**** Pls rate all useful responses ****
11-01-2014 05:28 PM
Hello;
If you mean the Lightweight and Autonomous, I have tried both of them but no positive result. Same thing.. the HandHeld failed to connect to the AP.
I am loosing my mind.. What about the CCX thing? I read an article said that I have to disable the CCX Extensions for a WlanID.. What do you say?
http://forum.xda-developers.com/showthread.php?t=350206&highlight=cisco
11-01-2014 07:33 PM
HI,
I mean different code of Autonomous code (like ap1g2-k9w7-tar.152-4.JB6.tar).
Is it possible to take a wireless packet capture on the 2.4GHz frequency this AP operates when client is trying to connect. That will tell us exact reason why client cannot associate to your network.
HTH
Rasika
**** Pls rate all useful responses ****
11-02-2014 06:07 AM
There Is different versions, you are right, I used only the last one.
Excuse me, would you please explain to me the last Idea you said? I did not get It well.. Or show me steps/example how to do that.
If this last solution won't help I will try the different codes..
Thanks In advance.
--
Cordially
11-02-2014 12:34 AM
11-02-2014 05:49 AM
Unfortunately, I am using the same method shown on the video. When I click on connect It just keep trying to connect showing : connecting then unavailable then connecting.... and so on.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide