Cisco AP C9120AXI-S with WLC 5520 version 8.10.130.0

Sunly · ‎04-18-2023

Helllo everyone,

I have an issue, our AP is VID 07, as check from Cisco Wireless Solutions Software Compatibility Matrix - Cisco it seem that it is not able to join the WLC 5520 version 8.10.130.0, unless we upgrade the WLC to 8.10.181.0 or later.

May I know is there any solution beside upgrade firmware of the WLC to 8.10.181.0 or later?

Thanks

Best regard

Sunly

Flavio Miranda · ‎04-18-2023

Hi

There is not. You went to the right place., the compatibilty matrix.

If the AP needs version 8.10.181.0 there is nothing you can do but upgrade the WLC.

marce1000 · ‎04-18-2023

- Besides other reply take note of : https://www.cisco.com/c/en/us/support/docs/field-notices/724/fn72424.html , which is included in that answer ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R · ‎04-18-2023

And you should refer to TAC recommended versions link below:

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390