02-18-2014 05:28 AM - edited 07-05-2021 12:12 AM
Hello,
I would like to know if someone can tell me what means the LED status?
When it is blinkink, or OFF?
Rightnow, i have the LED OFF, bur the SSID is working, the broadcast is working...
What does it mean?
Tx,
B.
02-18-2014 05:50 AM
You can enable and disable the LED on an access point if you want. Here is a link and most likely why your AP works but is in a disabled state. I'm assuming it's a lightweight AP
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010000001.html
Sent from Cisco Technical Support iPhone App
02-18-2014 05:54 AM
For autonomous, the command is led display off or led display dim.
Sent from Cisco Technical Support iPhone App
02-18-2014 07:20 AM
Hi ,
Please refer the following doc. for more information.
https://supportforums.cisco.com/docs/DOC-5377
Let us know if you are looking for anyting in particular ( any AP model)
Regards
Victor V
*****Help out other by using the rating system and marking answered questions as *****Answered"*****
02-18-2014 08:28 AM
Hi,
What is the model of the AP
Is it a Standalone AP or LWAP.
You can refer to the following link for the LED status:
Check table 7-1
It is for 1200 series AP.
Please let me know the exact model of your AP.
Thanks and regards,
Manas Pratap Singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide