Cisco LAP CAP 1142N-E-K9 AP mode Changing

[00u1h1sv18S9gvpDO5d7]

hallo 

I have one Cisco Cisco LAP CAP 1142N-E-K9 access point. i want to access Web interface of Access point but i have a problem. i have one error message '''the AP in not in Flexconnect mode'.'

i had tried top find out how can change AP mode  from local to Flexconnect but i had not found.

how can i change ap mode from local to Flexconnect and access my Access point web interface.

[marce1000]

  - FYI : https://semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap/

 M.

[Rich R]

@marce1000the 1142N AP is very old - no Mobility Express for that. (End-of-Support Date: 2018-09-30)

@00u1h1sv18S9gvpDO5d7you cannot use a CAPWAP AP without a Wireless LAN Controller (WLC), you need to convert it to autonomous.

You need to obtain the autonomous IOS image for that AP model which is long past end of support so no longer available from Cisco and then follow the conversion process: https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/