cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1496
Views
20
Helpful
8
Replies

Cisco Prime Infrastructure - How do I run a Channel Utilization Report

suisse
Beginner
Beginner

Anyone able to provide me with some tips to get Cisco Prime Infrastructure to give channel utilization reports?  (Bad CCI here)

 

Is there also a way to pull the minimum basic rates being used by all of the APs across various controllers or does that need to be viewed at the controller itself?

 

Thanks!

8 Replies 8

Flavio Miranda
Advisor
Advisor

Hi @suisse

 

For you first question you can find Channel Utilization on the Busiest AP report. 

For the second question, if I understood it right, you would like to see the basic data rate each AP is using, right?  I think this is not available. What you can see it the Required and Mandatory data rates configured on the WLC and this rule all the Access Point. 

 

 

-If I helped you somehow, please, rate it as useful.-

Yes sir, I would like to see those Supported and Mandatory data rates, is there a report to see those settings?

Data rate is something dynamic so keep track of all the Data rates shifting for all clients would be very Data base demanding. Bear in mind that don't make sense talk about Data Rate only for APs.

 

 

 

 

 

-If I helped you somehow, please, rate it as useful.-