Solved: Re: CISCO ROOM BAR - EIRP

sahil-thavai · ‎01-26-2025

Dear Team,

Can any one help me to get EIRP of Cisco Room BAR (CS-BAR)

2 Months ago we bought material , but there is stuck at Custom, Customer office want to know EIRP in terms of DBM Unit.

Please help me to get this.

Scott Fella · ‎01-27-2025

Take a look here: https://cae-cnc-prd.cisco.com/pdtcnc/#/

You just need to enter the part number and search, then hopefully in your country it show compliance. I don't know if that will help, but its something you can provide. The part# are in your datasheet you provided. Other than that, like @Rich R mentioned, you might have to reach out to Cisco, or get help form the company you purchased this equipment from.

-Scott
*** Please rate helpful posts ***

View solution in original post

Rich R · ‎01-27-2025

I think the only place you'll get that info from is the Cisco business unit.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

Scott Fella · ‎01-27-2025

Take a look here: https://cae-cnc-prd.cisco.com/pdtcnc/#/

You just need to enter the part number and search, then hopefully in your country it show compliance. I don't know if that will help, but its something you can provide. The part# are in your datasheet you provided. Other than that, like @Rich R mentioned, you might have to reach out to Cisco, or get help form the company you purchased this equipment from.

-Scott
*** Please rate helpful posts ***

sahil-thavai · ‎01-27-2025

@Scott Fella Thank your for your help. I got my answer.