CLi command for wireless controller to determine total of 802.11b only clients

[Steven Shelton]

The customer's wireless controller is currently supplying service for 802.11b, 802.11g and 802.11bn.  Using the command line, is there a command which will provide the total of clients which associated using 802.11b only, not 802.11bn or g.  Thank you.

[Scott Fella]

You can issue a show client summary and then look for 802.11b devices from that.  You can capture that output and filter that on a text file or in excel also if you want.

-Scott

[Steven Shelton]

Thanks Scott, that's exactly what I found too.  In this case, I'm working with several thousand clients and didn't know if there was an easier way.

Thanks again

[Scott Fella]

You can paste the output into excel and then do a text to column then you can use filter for the column header to only show 802.11b

-Scott

[Abhishek Abhishek]

This example shows how to display a summary of the active clients:

> show client summary

Number of Clients................................ 24