Client Profiling/Policing IPHONES

[nxsvc-cisco]

Hi All,

I´ve configured a policy for IPhones so that they will moved to an other VLAN.
When I take a look at the client details I can see that the policy match and that they client
will be moved to VLAN 91 (normaly the VLAN 90 is assigned to the SSID).
The problem is, that the IPHONE receive an IP from VLAN 90 and on the LAN side I can see, that the IPHONE is

still assigned to VLAN90.

The enviroment is a vWLC and the 1852AP´s run in Flexconnect mode, of course.

We use that config on an other location and there it works fine. I´ve also rebuild that on our LAB enviroment and there it also works. I´ve no idea what/where I can take a look....

Many thanks

M

[Haydn Andrews]

Its flexconnect mode APs do you actually have VLAN 91 available on the port the AP is connected to?

Ensure you have followed all the steps in this guide:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010010000.pdf