Client Stuck in IP learn state cisco 9800 WLC

[ittechk4u1]

Hello Experts,

I am testing Cisco 9800 series WLC with software version 17.3.3, 9115 AP is in local mode.

Issue: When I am using external DHCP server , also added the ip helper address command on upstream switch then all clients stuck in IP learn state.

If I use internal DHCP server then it working.

What could be the issue ?

Thanks

[Sandeep Choudhary]

Glad to help and thanks for posting the workaround.

[kagiso]

This was very helpful! Thank you for sharing. I'm running 17.3.4c and have spent hours troubleshooting. The solution for me was to remove the dhcp server address from the wlan policy. 

[ittechk4u1]

let me try this

[ittechk4u1]

1. Yes its there but client is getting IP when they connect with old WLC"2504"/AP but not with 9800 series.

    I also created dhcp scope on switch itself for testing where WLC is connected....still not working.

2. yes i did and also using the source interface

3. no I did not try..., FYI: If I use internal DHCP server then its working but not with External.

4. Tried still not working

any other ideas ?