cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2187
Views
0
Helpful
5
Replies

Client with same SSID on different AP cannot ping each other in FlexConnect mode

UnyChiu60866
Level 1
Level 1

I have two AP 1802 connect to the 3504 controller.

In FlexConnect mode, one client connect to AP1 and the other connect to AP2 , with the same SSID and VLAN.

Both client can get on the internet, but they cannot ping each other.

 

If clients are on the same AP, they can ping each other.

 

 

Is there any solution can solve this problem?

 

 

5 Replies 5

marce1000
Hall of Fame
Hall of Fame

 

 - Check if this thread can help you :

       https://community.cisco.com/t5/wireless-security-and-network/wlc-2500-allowing-clients-to-communicate-to-each-other/td-p/2519050

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

I have checked that P2P blocking action is disabled ,
and clients firewall are also disabled

If clients are on the same AP, they can ping each other

If flexonnect local switching (it can also be central switching but you did not specify) then check whether you have private vlan configured on the switch ports or protected ports because that has the same effect as peer to peer blocking.

Thanks for answering.
There is no private vlan configured on the switch.
Review Cisco Networking for a $25 gift card