Collecting AP Inventory from WCL

[Shao-Yu Chen]

I am in the process to inventory all lightweight AP from each WCL and WISM from all remote sites. Is there a command from CLI that I can use to display all lightweight APs' hostname from a controller? Or, maybe a setting from controller's web console that will help me to collect information from all APs? I am trying to obtaine hostname and IP address from each AP, and generate a EXCEL spreadsheet.

Thank you for the help                

[Rasika Nayanajith · Accepted solution]

"show ap summary"  CLI output of your controller will give you this information for all the registred APs to your controller.In GUI (Wireless -> Access point) section provide you this info.

If you have prime/WCS, you can run a report (AP Inventory)  you can get this as well.

HTH

Rasika

**** Pls rate all useful responses ***

[Shao-Yu Chen]

Thank you. This worked. I was able to do log session and turn the txt file into excel sheet.

[Rasika Nayanajith]

Great...

tks for rating the response

Rasika

[daytongl1]

This worked great!

Thanks!

[jain.manish94]

Sir how to export all the ap details with IP , name and serial number of AP from 9800-40 controller.

Any way where I can get output.

[Scott Fella]

I responded to you on this thread you create also:
https://community.cisco.com/t5/wireless/cisco-wlc-9800-40/td-p/5262479