05-30-2013 06:24 AM - edited 07-04-2021 12:09 AM
Is the cisco wlc 2504 compatible with the AIR-CAP-3602l and if so what firmware would i need to be running on the WLC ? My firm rushed out and bought a mesh solution without doing their homework
Solved! Go to Solution.
05-30-2013 07:10 AM
Hi Doug,
Data sheet for 3602 access point shows it support 2500 series WLC. Please refer to the link below.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11983/data_sheet_c78-686782.html
You may need firmware version above 7.2 to support 3602.
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!
05-30-2013 07:10 AM
Hi Doug,
Data sheet for 3602 access point shows it support 2500 series WLC. Please refer to the link below.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11983/data_sheet_c78-686782.html
You may need firmware version above 7.2 to support 3602.
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!
06-02-2013 08:33 AM
Really you should look at it more from a question of what software version is compatible for the controller. Once that is answered, the software version will have it's own compatibility matrix. In addition, release notes detailed for every release will specify any FUS required by controller platform. In other words, if I have a 2500 series controller running 7.0.x code, it will not support a 3600 ap deployment. Thx! //art
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide