Config guidelines for redundant WiSMs

[with_joerg]

Dear all,

I need some basic guidelines on how to make WiSMs redundant. Whilst I understand about mobility groups etc.. I seem to have problems with the basics.

Q: Do I need to configure both WiSMs with the applicable WLANs or do the WLANs only need to be defined on the master controller?

Q:Does every WiSM need interfaces in the VLANs linke to the WLANs or does only the master controller need this?

Q: How about mobilty anchors. Do I need to specify both WiSMs as mobility anchors?

Thanks,

--Joerg

[didyap]

Here is the URL for Configuring a Cisco Wireless Services Module and Wireless Control System it may help you :

http://www.cisco.com/en/US/docs/wireless/technology/wism/technical/reference/appnote.html