Configuration for Cisco 1812W

[george]

Hi,

I have the following scenario where a C1812W is configured for both LAN and WLAN (using the integrated radio interface on the router). I need to setup a different vlan for both the LAN and WLAN users and also NAT for Internet access. Is there a sample configuration because i did not manage to succesfully setup the router using the guides from cisco.com. Note that LAN users are connected to the built-in switch.

./G

[aghaznavi]

You can use Vlan and multiple NAT pools.

http://www.cisco.com/en/US/products/ps5853/products_configuration_guide_chapter09186a008045830f.html

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml

http://www.cisco.com/en/US/tech/tk648/tk361/tk438/tsd_technology_support_sub-protocol_home.html