Configure Aironet 1200 as a DHCP server for ONE VLAN

[timothy.lewis]

I have several Cisco Aironet 1200 APs, that I have configured with two SSIDs. The SSID for internal use is on VLAN 1. The second SSID is for guests to the company to have Internet access without having access to the internal network.

I want to configure the AP to act as a DHCP server for only the second SSID/VLAN

[dancampb]

The DHCP server on the AP will only service the subnet that is assigned to the AP's BVI interface. If you have the BVI interface mapped to the same VLAN as your guest SSID you should be good to go.