Wireless

I have WLC 4400/5508 I stumbled across this config paging disable command to stop page breaks, works great for the one session I am logged in but it do not work for other users..We want to apply this command globally? Is that possible ? Appericate al...

I have got a 3502 setup anf functioing in Office Extend mode. I have found one issue though. I have to set the checkbox on the my Management Interface to Enable NAT Address and put the external address in the box. Once this occurs no internal APs can...

Hello,We are keep getting the traceback from our wlc that says something like that:Traceback:  100ac650 10330528 10332290 10640b70 114a9f10 1150a494Traceback:  100ac650 10330528 10332290 10640b70 114a9f10 1150a494We are using image version 6.0.202.0A...

Hi This is my problem.I have two WLC, and I have a local netusers in one of the two WLC, and I want pass those usernames to the other controller, but i cant see the passwords of the netusers.Regards.

Network structure: 1. two WLC(primary and failover), located in HQ(local)2. fit APs for HQ(local) and branch offices(remote)3. windows DHCP server is only located in HQ(local), each office has separate WLAN IP address pool(achieve with superscope)4. ...

Hi! I'm trying to configure a dynamic access-reject that permit a client the connection in the network only between 8:00am to 8:00 pm.  I need that the Amigopod send a disconnect-request after to 8:00pm.For this,it's necessary that WLC sends to Amigo...

Good morning!The behavior of some mobile devices ( as Iphone , Itouch, not Blackberry) with WL Controller is that, when the client doesn't use it, it disconnects after eight minutes.The client doesn`t use the device:First minute: (Cisco Controller) >...

Hi I have UC560 and needs an IP Phone wireless 7925 configured on it. The wireless Acees point is 1242g.Can anyone help, does the phone require any special config or settings or it would be same as the normal IP Phones.How will I configure the 7925 a...

Hi Forumers'I had install third party CA cert and device cert into the WLC. I would like to ask is there any command can delete these certificate?thanks

Its a small implementation one 2125 WLC, 24 1130ag light weight APs running in HREAP mode at branch offices.  Using the DHCP option to feed the APs the address of the controller. Now I have 5 more APs to install.  I have put up a 2106 controller and ...

I have a 2106 WLC with 4 AP's (AIR-LAP1252AG-A-K9)One of the AP's (port 4) is only connecting at 10Mbps, not 100Mbps and I don't know why?All the ;ports are set on the controller to AUTO,  When I try to force that port to 100Mbps, the link drops.Coul...

Hi  We're looking at using staffs own softphones with a SIP client over our wireless network.We have a Avaya Communication manager which the SIP will via.What I'm looking for is a way of keeping our wireless network secure but allow users to use thei...

I have a 4404 controller. Under my main WLAN/SSID I have it pointing to a new server with LDAP on it. I do those under the WLAN > security > AAA settings.I also have the new LDAP server created under Security > AAA > LDAP.My problem is that when I sh...