ā03-03-2016 12:33 AM - edited ā07-05-2021 04:43 AM
Hi,
I am unable to config the country code for 3702 AP. Pls any help me
ā03-03-2016 01:08 AM
You don't need to configure country code Access Point!!! Normally its hard-coded in firmware.
Are you using AP with WLC or its a autonomous AP ?
Please paste the sh version output from AP.
Example: AIR-CAP3702I-x-K9, Here X is the country/Region code(Ex: E is for Europe..., A for America)
Regards
Don't forget to rate helpful posts
ā03-03-2016 05:08 AM
HI
Controllers and access points are designed for use in many countries with varying regulatory requirements. The radios within the access points are assigned to a specific regulatory domain at the factory (such as -E for Europe), but the country code enables you to specify a particular country of operation (such as FR for France or ES for Spain). Configuring a country code ensures that each radioās broadcast frequency bands, interfaces, channels, and transmit power levels are compliant with country-specific regulations.
ā03-03-2016 09:28 PM
If it is an universal access point like below, then do priming
AIR-AP3702E-UXK9
AIR-AP3702I-UXK9
Refer link : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide