Configuring local management user

[Jorge Castro]

Hello, everyone

I'm trying to configure a "local management user" with lobby-admin in access modes on WLC 2504. I setup the user, after that I'm logging with the user correctly but when I try to create a guest user I capable to select any WLAN, and I don't want that. There any way to setup the "local management user" to create "guest user" on certain wlan only?

For example: 

• LMU "A" Can create guest users on WLAN "guests"
• LMU "B" Can create guest users on WLAN "Video"

I attached some screen capture to be more clear.

Tks,

JC.

I 

[Sandeep Choudhary · Accepted solution]

HI Jorge,

It is not possible in WLC.

But if you have a Cisco NCS or Prime Infrastructure then its possible. You can select one SSID under lobby ambassador defaults TAB from Profiles drop down.

Regards

Dont forget to rate helpful posts

[Jorge Castro]

Hello Sandeep, 

Thanks for the answer, unfortunately the customer doesn't have one. But now I know how to proceed.

Regards,

JC.