Configuring MSCHATV2 in 9800

[Leftz]

Hi We have user who like to access wifi using MSCHATV2. Do we need to configure something for this MSCHATV2 in wlc 9800? Anyone can share the experience? or provide with some suggestions? Thank you

[MHM Cisco World]

I don't think MSCHATV2 is allow in 9800 but you can config EAP with MSCHATV2.

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215026-local-eap-authentication-on-catalyst-980.html

[Rich R]

Presume you mean MSCHAP v2 used for the EAP inner authentication method.  There's no specific configuration for that.

See also https://stackoverflow.com/questions/30344085/radius-with-ms-chapv2-explanation and https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-3/config-guide/b_wl_17_3_cg/local-extensible-auth-protocol.html
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-3/cmd-ref/b_wl_17_3_cr/configuration-commands-g-to-z.html#wp4018823814