Controll AP Register to WLC

[lampard1398]

How can I control which Leightweight AP register to WLC? e.g. by MAC address or other method.

This is to prevent someone add a Leightweight AP to the network.

Regards,

[mahlekey1]

All this you would find on the white paper. just dowload it. And follow step by step configuration.

[Richard Atkin]

You're asking two different questions.

You control which WLC an AP joins by (A)configuring the Primary, Secondary & Tertiary controller options, or (B) the Master Controller Option.

You can prevent 3rd parties from putting their own LWAPP APs onto your WLC by authenticating your APs by MIC/SSC/MAC/etc...

Read up on the info Cisco publish...

RA