controller access using service port

[suthomas1]

Hi,

We have two 5508 in ha(ap sso) mode. the service port is configured with 192.168.125.1.

Will i be able to access the controller web interface ( https://192.168.125.1 ) if my laptop is directly connected to the controllers service port(SP) using a ethernet cable.

I was able to do this before, but seems after configuring the HA , it is not accessible any more via service port.

Please help on this.

[Scott Fella · Accepted solution]

Might want to look at this thread

https://supportforums.cisco.com/thread/2203573

Sent from Cisco Technical Support iPhone App