Controller Association Latency in 9800 controller

[PrabakaranBalasubramanian16319]

Hello,

All access point from one site is associated to remote site WLC. We see that all AP from one site  Controller Association Latency is 1hr 58min. 

It could cause any issue. what will happen if association latency is too high?  Clients wont be connected to AP?

[Flavio Miranda]

Hi

 You probably are looking on the Access Point association  right?  This could be caused by slow link or too much packet drops.

But, this is not related to client association. Once the AP is jioned the WLC, clients will be fine. The problem is that is an AP drops from the WLC, it will take longer to get online again.