09-19-2016 05:42 AM - edited 07-05-2021 05:50 AM
Greatings to all
I need some help on controller based ap
Example: Suppose we want to install some AP air cap 1700, with 2500 series controller. Every AP should broadcast SSID.
AP 1 SSID: Cisco
AP 2 SSID: Guest (in guest location)
Is it possible on controller.
With Thanks
Mehedi Hasan
09-19-2016 12:31 PM
Mehedi,
By default all SSID created on the WLC are broadcasted on all APs. If you want only AP1 to broadcast CISCO then you need to create AP group, ADD the APs to the AP group and then choose what SSIDs you want to broadcaste
09-19-2016 10:30 PM
Hi Friday,
can you share any documents or link on AP group or how to configure it.
Regards,
Yasib Ahmed
09-20-2016 06:26 AM
Yasib,
I sure can Here is a link to Cisco's config guide. if you have anymore questions let me know. its a pretty easy setup.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_01100001.html
****Please rate if you find the info helpful *******
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide