Controller command question

[taimoor khan]

Hello Guys,

just a simple question, how do I use """""""""" | INCLUDE """"" in WLCs. I am unable to find pipe option in WLC CLI could anyone help. I am trying to search

sh runnin | include capwap --------- but its not working

runing 7.3.103.14

[Scott Fella · Accepted solution]

There is no pipe in the AirOS which the WLC runs. In the 3850 and 5760's you can since they are IOS.

Sent from Cisco Technical Support iPhone App

[taimoor khan]

thats gona increase my work !

Thanks for reply scott, how do I check capwap for all controller at once ?

[Scott Fella]

What exactly are you looking for?

Sent from Cisco Technical Support iPhone App

[taimoor khan]

we have couple of AP down and want to see is there any problem with CAPWAP.

[Scott Fella]

Well an ap not joining usually is a network related issue. You can alway go to the GUI and under Monitor, look at the statistic for ap join.

Sent from Cisco Technical Support iPhone App

[Scott Fella · Accepted solution]

Capwap is default for WLC's with the newer code, that's why I ask what exactly are you looking for.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

You can only see stats or information when the ap is joined to the WLC. Other than that, information from the ap console shows good information. Also looking at the switch port for errors or the switch logs can help.

Sent from Cisco Technical Support iPhone App

[taimoor khan]

thanks for quick reply, seems like a network issue.

[Abhishek Abhishek]

Hello,

As per your query i can suggest you the following solution-

I agree with Scott as there is no pipe in the Air OS which the WLC runs. In the 3850 and 5760's you can since they are IOS.

Hope this will help you.