cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4523
Views
5
Helpful
2
Replies
arjun-hegde
Beginner

conversion Autonomous AP to LWAPP

hi there,

we are using Cisco 1140 Autonomous AP (AIR-AP1142N-E-K9 ) and now we wish to convert the Autonomous Access Point to light Weight Access Point(LWAP). Can we do this please let me know if there is any documentation related to this.

Regards,

Arjun

1 ACCEPTED SOLUTION

Accepted Solutions
Surendra BG
Cisco Employee

Hi Arjun,

Yes we can do this.

Download the LWAPP image(W8) from the cisco website and get the console access the AP and just issue the command..

archive download-sw/overwrite/force-reload tftfp:////

Regards

Surendra

Regards
Surendra BG

View solution in original post

2 REPLIES 2
Surendra BG
Cisco Employee

Hi Arjun,

Yes we can do this.

Download the LWAPP image(W8) from the cisco website and get the console access the AP and just issue the command..

archive download-sw/overwrite/force-reload tftfp:////

Regards

Surendra

Regards
Surendra BG

Sorry...

archive download-sw/overwrite/force-reload tftp:////

I assume we have the TFTPd32 downloaded from google and in the TFTPd32 pointing to the image.

Regards
Surendra BG
Create
Recognize Your Peers
Content for Community-Ad