Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Hi,Is it possible to integrate my windows AD with Cisco Wireless LAN controller as LDAP server. I dont have a Cisco ACS server.Thanks.
Hi All,I need a favour, can someone tell me how i can transfer an image from one AP to another AP. I know you have to make one of them as a tftp-server, but it will be helpful if someone can just specify the cli here. I've also tired archive download...
To all i need wireless bridge or AP which fullfill following requirementwireless N supportedgigbit ethernet supportedPOE supported WDS supported (Operatable as wireless repeater/bridge)Dual Band optionalThanks in advanceWaiting for prompt response
I'm wondering if anyone is using Vocera with H-Reap APs on a remote site? We are trying to not have to purchase a controller to leave on site and wanted to know if anyone has done this and if there were any problems. We currently have about 50 1140...
Resolved! WPA Migration Mode
We have Cisco Aironet 1130AGs. We are going to transition our network to WPA, but now it's all WEP. I'd like to set up WPA Migration mode on all of our access points so WEP and WPA clients can access it, but I'm having problems setting it up. Does an...
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-...
Hi,I have a 7925g that does not recgonize a fully charged battery. I plug the phone in, after a minute or so it states that the charge is complete. When I unplug the phone the battery level drops to one red bar and soon it shuts itself off. I ...
Resolved! 891 Router Wireless configuration
I read somewhere when researching this router that the built in AP could be converted to a lightweight device and controlled via a centralized controller. I am trying to figure out how to do this however I can't find any documentation stating that is...
Hi ,My cleint has purchased a 1861 ISR router. Now he wants to activate wireless features in that. Please share document where i can find how to configure 1861 router as radio. also My interface dot11radio is reset and and down , How is hould make it...
Hi,I have an issue using ACS 5.0 on compatibilty with Aruba controller, on the net it says Aruba is compatible on ACS version 4 so I plan to downgrade the ACS. Can I use the ACS 4.2 Recovery DVD to downgrade? If so, what are the steps? Do I need to b...
Scenario is, I have a huge warehouse. I want to use 1260 Access Points on walls and ceilings. ceiling is 15m high and racks are 3m high.What 5 GHz directional patch can I use? Is there a better option? So far with some planning, I want to have direct...
Resolved! in my cisco asa 5510 interface flapping
cisco asa 5510 interface flapping
WISMS on ver 6.0.196Receiving several hundred messages:*Jul 06 16:51:58.943: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:407 Max EAPOL-key M1 retransmissions exceeded for client 00:19:88:05:2d:53*Jul 06 16:51:57.792: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_...
Are there any real network outages when changing the settings for the Client Exception Policy and Transmit Power Threshold on WLCs?
I'm using wcs 6.0.132.0 and I'm trying to create an account to allow my collegues to monitor the wcs, disable clients (able to do this part without a problem) but also to enable manually disabled clients. I can do this by allowing the group to have a...
