06-01-2010 10:28 PM - edited 07-03-2021 06:50 PM
hi there,
we are using Cisco 1140 Autonomous AP (AIR-AP1142N-E-K9 ) and now we wish to convert the Autonomous Access Point to light Weight Access Point(LWAP). Can we do this please let me know if there is any documentation related to this.
Regards,
Arjun
Solved! Go to Solution.
06-01-2010 10:34 PM
Hi Arjun,
Yes we can do this.
Download the LWAPP image(W8) from the cisco website and get the console access the AP and just issue the command..
archive download-sw/overwrite/force-reload tftfp://
Regards
Surendra
06-01-2010 10:34 PM
Hi Arjun,
Yes we can do this.
Download the LWAPP image(W8) from the cisco website and get the console access the AP and just issue the command..
archive download-sw/overwrite/force-reload tftfp://
Regards
Surendra
06-01-2010 10:36 PM
Sorry...
archive download-sw/overwrite/force-reload tftp://
I assume we have the TFTPd32 downloaded from google and in the TFTPd32 pointing to the image.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide