cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1057
Views
5
Helpful
3
Replies
CB90021204
Beginner

Convert Autonomous to lightweight AP - Static IP Address

Hi,

I've converted a couple of Autonomous APs to lightweight recently and once they reboot they have a static IP configured on them, which then requires console access to remove the static IP.

 

Below are the commands I run to convert the AP:

AP#archive tar /xtract ftp://username:password@FTP Server IP/ap1g2-rcvk9w8-tar.152-2.JB3.tar flash:/

AP(config)#boot system flash:/filename

AP#copy run start

 

Is there something I'm missing in my process which will prevent the AP from having a static IP address when it reboots and loads the lightweight image?

 

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions
Leo Laohoo
VIP Community Legend

AP#copy run start

Instead of saving the config, you need to delete the config using the command "wr default". 

View solution in original post

3 REPLIES 3
Leo Laohoo
VIP Community Legend

AP#copy run start

Instead of saving the config, you need to delete the config using the command "wr default". 

View solution in original post

Thanks Leo

Thanks Leo!

This saved me from breaking a bunch of APs half way around the world. I broke one, then found your post - lifesaver! I really thought I had bricked the AP.

-Brett

Create
Recognize Your Peers
Content for Community-Ad