Coverage Hole Detection & RF Profiles

[Nick Lavender]

Hi Guys,

I've recently started to deploy RF profiles on various sites based on different data rate requirements. I know before the days of RF Profiles that Coverage Hole Detection (CHD) was enabled on the WLAN.

My query is, now that RF profiles exists, can you disable CHD on a specific WLAN and enable it on an RF profile or does it have to be enabled on both for it to function?

Cheers,

N

[Thomas McClintic]

What version of code are you running?

[Nick Lavender]

7.6.130.0

I have a feeling it needs to be enabled globally on the WLAN and then it can be "tweaked" using the profile configuration.

[Thomas McClintic]

I still need to play with 8.0, that is why I was asking because I am not sure on that version. What I gather from the documentation it is the same... http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01011101.html

However, with 7.6 you will need to have it enabled on the WLAN as there is no way to 're-enable' it on the RF Profile. You could tweak it to not be kicked off often though