Create guest wifi at remote site with DID access

[DAVID]

I have multiple remote sites with Cisco 3700i access points in Flex-connect that are managed by a pair of 5520's running in the data center.  I'd like to setup a POC guest wifi network where the users on the guest-wifi get an IP address locally at the remote site from the Cisco C1100 router and are able to access the Internet locally at the site.  

[Rasika Nayanajith]

You can create this new SSID with FlexConnect local switching enabled. That should allow you to locally terminate that traffic & give them direct internet access.

HTH

Rasika

*** Pls rate all useful responses ***

[DAVID]

I think I know what I need to do but are there any  documentation examples that I can look at. In the end what I want to accomplish is that the guest will connect to the wireless at the store and  I use CMX Connect and Engage to provide guest services.

What I want to do first is to just provide simple Internet access with the access going out the local connection. Then I will follow up with a basic CMX engage setup

All of this is in a lab environment

[patoberli]

Here's a manual:
https://community.cisco.com/t5/wireless-mobility-documents/wireless-lan-flexconnect-configuration-example/ta-p/3112924

You want Flexconnect with Localswitching for that SSID.