Creating policy tags in Cisco Prime

[anthonymurphy586]

We just synced our new 9800 WLC to Cisco Prime. However, when we go to configure APs using Prime we can't configure policy tags (AP groups). Is there a way to import those configurations from the 9800 to Prime? or how do we assign these to the APs using Prime? 

[Scott Fella · Accepted solution]

This feature is more for DNA center not Prime.  Prime has limited capabilities when trying to "Configure" the 9800's vs AireOS.  You can always configure the tags from the 9800 controllers.

On the 9800's you can create a regex filter to apply tags if you want.  You can also look at the configuration on the cli and build a script to apply tags to mac address.

[Gaurav Kansal]

Hi Anthony

There is limited  option in Cisco Prime.You can create Tags in 9800 WLC.  In Prime check below path if you find some thing

Configuration / Wireless Technologies / Cisco Catalyst 9800 Configuration

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-7/user/guide/bk_CiscoPrimeInfrastructure_3_7_0_User_Guide/bk_CiscoPrimeInfrastructure_3_7_0_User_Guide_chapter_011010.html

Good Luck