09-10-2018 08:04 PM - edited 07-05-2021 09:09 AM
Hi,
I am connecting a few Cisco Aeronets to Cisco 3750G switches to provide WiFi access. I have created VLANS and given switchport vlan access.
I will be receiving Cisco Merakis very soon for a full scale deployment. at what point would I need a wireless controller? can I use the Cisco 3750G configuration to achieve this WiFi access points configurations?
No active drectory connection at this time but with Merakis arriving , I would need that for secure authentications and all other security that these Access Points will need.
Please advise,
Best Regards,
Masood
Solved! Go to Solution.
09-10-2018 08:41 PM
I will be receiving Cisco Merakis very soon for a full scale deployment. at what point would I need a wireless controller?
Meraki Access point does not require a controller to manage. You can provision/manage via online portal.
What Access point model you currently plugging to 3750?, if they are AireOS based (like 2702/2802/etc) it require a controller to manage.
HTH
Rasika
***Pls rate all useful responses ***
09-10-2018 08:41 PM
I will be receiving Cisco Merakis very soon for a full scale deployment. at what point would I need a wireless controller?
Meraki Access point does not require a controller to manage. You can provision/manage via online portal.
What Access point model you currently plugging to 3750?, if they are AireOS based (like 2702/2802/etc) it require a controller to manage.
HTH
Rasika
***Pls rate all useful responses ***
09-17-2018 11:42 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide