design for wireless project....need help....

[azeemo157]

Hi Team

i have a requirement from client and need suggestions on the design. Client has 1 main office and 5 remote branches. client requires wireless in all offices. approx 600 access points with 100 in each location client requires all wireless access points to be registered at HO controller and a redundant controller to be at the branch. if the controllet @ HO goes down access point to be served by the controller local to the site.

Is this type of a design possible ? kindly do help me in suggesting the best for my clent.

Thanks !!!

[azeemo157]

hi

I have 1 GIG bandwidhth between Remote site and HQ. The customer has laid fiber between each remote site to the HQ.

[Scott Fella]

That should be okay... Just look at the current link utilization and make sure the added bandwidth will not affect certain applications or voice. But a gig link should be okay. You don't have any static ip devices do you? Because in a failover, those devices will not work assuming that it's L3 between HQ and the remote site. Client devices will have to be able to re-associate and renew their ip address also in order for your design to work. Sticky clients might require a manual renew in order to obtain a new dhcp address.

Thanks,

Scott Fella

Sent from my iPhone