10-26-2010 08:55 AM - edited 07-03-2021 07:20 PM
There is a recommendation by Cisco of the minimum number of gigabit ports, which is to be installed by the amount of AP associated with a controller 5508, for 150 AP is associated with a driver, you must install at least 3 gigabit ports?
Please, we need this information to design a solution.
Best regards.
Giovanni Anfossi
10-27-2010 01:41 AM
Hi,
From the config guide Cisco 5500 series controllers have no restrictions on the number of access points per port, but Cisco recommends using LAG or multiple AP-manager interfaces on each Gigabit Ethernet port to automatically balance the load:
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60mint.html#wp1277659.
HTH,
Tiago
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
10-27-2010 07:18 AM
Thanks, this information help I need.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide