DHCP scope per WLAN on WLC

[Atsushi Ikeda]

Hi,

I want to use the internal DHCP server on WLC 2504,
and devide a VLAN ( i.e., DHCP Scope) per WLAN.

How can I configure it ?
I want to know also about interface settings.

Thanks.

Regards,
Atsushi Ikeda

[Sandeep Choudhary · Accepted solution]

Ues interface Groups.

check this post:

https://rscciew.wordpress.com/2014/01/22/configure-dynamic-interface-on-wlc/

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_0100110.html

Regards

Dont forget to rate helpful posts

[Atsushi Ikeda]

Thank you for reply.

I could do it by using interface group and dhcp link select.

Thanks

Regards,
Atsushi Ikeda

[Sandeep Choudhary]

If you are satisfied with the answer then please mark this question as answered, it may help others. Regards Don't forget to rate helpful posts

[mohanak]

Configuring DHCP

You can configure WLANs to use the same or different Dynamic Host Configuration Protocol (DHCP) servers or no DHCP server. Two types of DHCP servers are available: internal and external

This section contains the following topics:

•Internal DHCP Server

•External DHCP Servers

•DHCP Assignment

•Configuring DHCP

•Configuring DHCP Scopes