cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
15247
Views
10
Helpful
5
Replies

Discovery response from MWAR 'HOSTNAME' running version 16.12.1.0 is rejected. on a 9120

key_tone_9926
Level 1
Level 1

I'm trying to set up the 9120axp running 17.2.1.11 to connect to a new 9800 L_F WLC running 16.12.01.

On the AP Im getting ( Discovery response from MWAR 'HOSTNAME' running version 16.12.1.0 is rejected)..
I have created the wlc management address on the wlc of 10.0.0.2 and the I have the AP connect to a L3 switch with dhcp configured so the AP now has an IP and a default gateway.

Any help you can provide would be gratefully received.

Below is the log for the 9120 AP.
=============================
CAPWAP State: Discovery
[*03/25/2020 03:43:27.2400] Discovery failed 5 times. Release/Renew DHCP
[*03/25/2020 03:43:27.2400] CAPWAPd forces DHCP restart.
[*03/25/2020 03:43:27.2400] CAPWAPd forces DHCP restart.
[*03/25/2020 03:43:27.2460] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*03/25/2020 03:43:27.2470] Discovery Response from 10.0.0.2
[*03/25/2020 03:43:27.2470] Discovery response from MWAR 'HOSTNAME' running version 16.12.1.0 is rejected.
[*03/25/2020 03:43:27.2470] Failed to decode discovery response(status = 4).
[*03/25/2020 03:43:27.2470] CAPWAP SM handler: Failed to process message type 2 state 2.
[*03/25/2020 03:43:27.2470] Failed to handle capwap control message from controller - status 4
[*03/25/2020 03:43:27.2480] Failed to process unencrypted capwap packet 0x55b305b000 from 10.0.0.2
[*03/25/2020 03:43:27.2480] Failed to send capwap message 0 to the state machine. Packet already freed.
[*03/25/2020 03:43:37.8070] ethernet_port wired0, ip 10.0.0.62, netmask 255.255.255.0, gw 10.0.0.1, mtu 1500, bcast 10.0.0.255, dns1 10.0.0.1, vid 0, static_ip_failover false, dhcp_vlan_failover false
[*03/25/2020 03:43:46.6970] WTP IP address changed from 0.0.0.0 to 10.0.0.61, restart CAPWAP.
[*03/25/2020 03:43:46.6970]
[*03/25/2020 03:43:46.6970]
[*03/25/2020 03:43:46.6970] Going to restart CAPWAP (reason : WTP IP address changed)...
[*03/25/2020 03:43:46.6970]
[*03/25/2020 03:43:46.6970] Restarting CAPWAP State Machine.
[*03/25/2020 03:43:46.6980] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Discovery(2).
[*03/25/2020 03:43:46.6980]
[*03/25/2020 03:43:46.6980] CAPWAP State: DTLS Teardown
[*03/25/2020 03:43:46.7120] aborting ewlc download C9800-AP-iosxe-wlc.bin Dtls cleanup
[*03/25/2020 03:43:46.7120] aborting ewlc download C9800-AP-iosxe-wlc.bin
[*03/25/2020 03:43:46.8200] do ABORT, part2 is active part
[*03/25/2020 03:43:46.8370] upgrade.sh: Cleanup tmp files ...
[*03/25/2020 03:43:46.8580] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
[*03/25/2020 03:43:46.8580] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
Discovery response from MWAR [*03/25/2020 03:43:53.0340] AP IPv4 Address updated from 10.0.0.61 to 10.0.0.62
[*03/25/2020 03:44:01.3330]
[*03/25/2020 03:44:01.3330] CAPWAP State: Discovery
[*03/25/2020 03:44:01.3390] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*03/25/2020 03:44:01.3390] Cleanning up DTLS connection.
[*03/25/2020 03:44:01.3400]
[*03/25/2020 03:44:01.3400] CAPWAP State: DTLS Teardown
[*03/25/2020 03:44:01.3560] aborting ewlc download C9800-AP-iosxe-wlc.bin Dtls cleanup
[*03/25/2020 03:44:01.3560] aborting ewlc download C9800-AP-iosxe-wlc.bin
[*03/25/2020 03:44:01.4650] do ABORT, part2 is active part
[*03/25/2020 03:44:01.4810] upgrade.sh: Cleanup tmp files ...
[*03/25/2020 03:44:01.5030] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
[*03/25/2020 03:44:01.5030] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: DTLS Teardown(4).
[*03/25/2020 03:44:15.9670]
[*03/25/2020 03:44:15.9670] CAPWAP State: Discovery
[*03/25/2020 03:44:15.9700] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*03/25/2020 03:44:15.9720] Discovery Response from 10.0.0.2
[*03/25/2020 03:44:15.9720] Discovery response from MWAR 'HOSTNAME' running version 16.12.1.0 is rejected.
[*03/25/2020 03:44:15.9720] Failed to decode discovery response(status = 4).
[*03/25/2020 03:44:15.9720] CAPWAP SM handler: Failed to process message type 2 state 2.
[*03/25/2020 03:44:15.9720] Failed to handle capwap control message from controller - status 4
[*03/25/2020 03:44:15.9720] Failed to process unencrypted capwap packet 0x55b3033000 from 10.0.0.2
[*03/25/2020 03:44:15.9720] Failed to send capwap message 0 to the state machine. Packet already freed.

2 Accepted Solutions

Accepted Solutions

marce1000
Hall of Fame
Hall of Fame

 

  - Check AP-model , controller & software versioning  compatibility info's here :
              https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

Rasika Nayanajith
VIP Alumni
VIP Alumni

Your AP model requires min software version 16.12.2, therefore you have to upgrade your 9800 first & then try it.

9120-MinSoftware.PNG

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

5 Replies 5

marce1000
Hall of Fame
Hall of Fame

 

  - Check AP-model , controller & software versioning  compatibility info's here :
              https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Thank you very much for the spot.

Rasika Nayanajith
VIP Alumni
VIP Alumni

Your AP model requires min software version 16.12.2, therefore you have to upgrade your 9800 first & then try it.

9120-MinSoftware.PNG

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html 

HTH

Rasika

*** Pls rate all useful responses ***

Thank you very much for the spot all working now.

it is unable to join this controller. for this ip is releasing

 

Review Cisco Networking for a $25 gift card