06-25-2013 12:58 AM - edited 07-04-2021 12:17 AM
We have both DNS and Option 43 contorller discovery ways in one network but they direct to different WCL .
I just want to know which one is more aggressive to advertise the IP address of controller.
thank you in advance.
06-25-2013 06:59 AM
Here is a link to the AP's selection process. Also in the link the how the AP will choose which WLC.
After the LAP completes steps 1 to 5 of the Layer 3 LWAPP WLC Discovery Algorithm, the LAP selects a WLC from the candidate WLC list and sends that WLC an LWAPP join request.
WLCs embed this important information in the LWAPP discovery response:
The controller sysName
The controller type
The controller AP capacity and its current AP load
The Master Controller flag
An AP-manager IP address
The LAP uses this information to make a controller selection, with use of these precedence rules:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml#topic3
Sent from Cisco Technical Support iPhone App
06-25-2013 08:33 PM
I need to know what's the procedure for LAP when looking for WLC ? which one will be the first ? DNS looking for option or DHCP option ?
thank you
Scott Fella wrote:
Here is a link to the AP's selection process. Also in the link the how the AP will choose which WLC.
After the LAP completes steps 1 to 5 of the Layer 3 LWAPP WLC Discovery Algorithm, the LAP selects a WLC from the candidate WLC list and sends that WLC an LWAPP join request.
WLCs embed this important information in the LWAPP discovery response:
The controller sysName
The controller type
The controller AP capacity and its current AP load
The Master Controller flag
An AP-manager IP address
The LAP uses this information to make a controller selection, with use of these precedence rules:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml#topic3
Sent from Cisco Technical Support iPhone App
06-25-2013 09:13 PM
It's in the link I posted.
Sent from Cisco Technical Support iPhone App
06-25-2013 09:02 PM
Hello,
Please check the following cisco doc for the procedure for LAP when looking for WLC.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide