Does Aironet 1852e support interference detection and channel selection

[LiaoYuRuei]

Hello , I have a question about Cisco Aironet 1852e AP ,

does this AP supports interference detection ?

if it support ,when the AP on a channel with interferences ,

does it change the channel automatically ?

thank you for your answer.

[Leo Laohoo]

does this AP supports interference detection ?

CleanAir, by default, is disabled.  Enable CleanAir and it will detect inteference. 

does it change the channel automatically ?

EDRRM, Event Driven Radio Resource Management, is disabled by default.  Enable this allows the AP to change channel when interference is detected to be strong.

[LiaoYuRuei]

Thank you for your help , I saw the setting step on controller on the Cisco website ( Figure1 and Figure2 ) .

but my AP's GUI does not like that , I found a similar GUI on the Internet ( Figure3 ) .

Does my AP can do the things of interference detection and change channel when the interference is detected to be strong automatically ?

p.s. My AP's firmware type is Mobility Express , version is 8.3.112 ,  and there is a virtual controller in the AP .