06-09-2014 08:10 PM - edited 07-05-2021 12:58 AM
Does the new Cisco 702W AP support 802.11AC standard?? and also like we have site survey image for 3600-I AP, does the 702W also have a site survey image, or I can site-survey jsut with any autonomous firmware on it.
thanks
Solved! Go to Solution.
06-09-2014 08:25 PM
from looking at the cisco documentation for the cisco 702w it does not support 802.11ac
but maximum of 802.11n
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/702W/quick/guide/ap702Wgetstart.html#pgfId-51225
hopefully this helps
06-09-2014 08:25 PM
from looking at the cisco documentation for the cisco 702w it does not support 802.11ac
but maximum of 802.11n
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/702W/quick/guide/ap702Wgetstart.html#pgfId-51225
hopefully this helps
06-10-2014 03:25 PM
thanks for the .11 ac reply. About the site survey image i ended up using the autonomous image from 702-i, as the cisco website doesn't itself have a sutonomous image listed under 702w AP download.
it just needs to be ap1-g1. and it works for the site survey. thanks
07-16-2014 06:23 PM
No, 702W does not support 802.11AC. It is limited to 802.11 n.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide