Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Hi All, I need to understand , whether websense integration support in the 5520 controller or not? If yes , request you to share supportive configuration document for the same Thanks in advance.
For some reason, two AP's at one site, aren't joining our 5508 WLC. I see that the msglogs are stating that the certs are expired. I know that one of the solutions is to change the date on the WLC(which I don't want to do), and the other is to enab...
Hi!We're currently trying to set up FlexConnect for APs sitting off a 3850 in the remote office. The MC in this case is a 5508 WLC sitting in one of our main sites.It's a simple question I have, where on earth is the Cisco documentation describing ho...
Hi All, We have a few offices with an adtran MPLS router for data traffic and then an internet circuit connect to an ASA 5515x for internet traffic. If both circuits are down we don't have another backup other than individual hotspots. I would rathe...
Hello; I have a Cisco 5508 operating in new mobility mode so that it can act as an anchor controller for 3850 and 5508 (also in new mobility mode), this anchor controller is keep sessions for a long period of time and is not timing out sessions, thes...
Has anyone had experience with "Leaky Coax" via wifi. I have an industrial site that has difficulty with adding AP's due to the concrete and steel infrastructure. Someone throughout the idea of using this type of cable. From what I've read its not...
I have had several co-workers help me with my problem having a local 2504 being hacked and changing the admin password and the AP passwords. We believe they are somehow using the Recover-Password option. Is there a way to disable this on the device?
Hi , I have enabled multiple traces on wlc and forgotten what are the traces . Now how to find out and disable the traces ? Thanks
Hi, Omnipeek shows severe datalink broadcast storms (sniffer enabled on AP and send the traffic to omnipeek ) . how do i stop this ?
Hi Folks, Good day. Straight to the issue. All apple devices (both phone and laptop) are redirected automatically to the authentication page when they connect to the Guest SSID without the need to open a browser and type a valid URL. However, on wind...
Hi, Vmware client (VM player) unable to get the IP address from DHCP when connected on wireless network. but the physical machine/ Laptop is gets the ip from DHCP. Controller 5508 Urgent!! Any help on query would be appreciated Thanks Laxmi
I have the following configuration error I'm trying to correct: 80003, Spectralink: DTIM value should be 2, currently it is 0, check in 802.11b Configuration Running software version: 8.0.121.0 I have the DTIM value of 2 set in the SSID, but I cann...
Hello Experts, 1.my lightweight AP(3502i) is not joining with virtual Wireless Lan Controller my Ap is getting IP from DHCP , but it shows not joined in wlc, can you please tell me what was the problem, 2.is it possible to install new image in lig...
I have installed the 1552c and 3600 Access Point but I don't see them in dual-band radio in 5508 Wireless Controller.I know that 3600 has the ability to add a 802.11ac module which is considered as a dual radio but how to check if that module is alre...
