Download and upload speed per ssid in air-sap2602.

[waqas sardar]

Dear team,

How to limit the download and upload speed per ssid in air-sap2602 ?

SSID =5MB download + 1upload

SSID= 30MB download + 5upload

Regards

[Scott Fella]

Waqas,

On autonomous access points you can't really limit or control the upload and download. This feature is available on a Unified Wireless Architecture using a WLC. Your best bet if your devices are in the same subnet is maybe controlling bandwidth from your layer 3 or FW.

Sent from Cisco Technical Support iPhone App

[Rasika Nayanajith]

Agree with Scott, you can't do any thing on the AP level for this.

Traffic shaping & Policing at your L3 switch for each vlan is some options you should explore. Again this is depend on the hardware/software version you are running on the switch & can be configured in certain direction only. (shaping egress & policing ingress)

HTH

Rasika

**** Pls rate all useful responses ****

[waqas sardar]

we are  using cisco 1941 with EHWIC-D-8ESG-P .

How i can configure Download and upload speed per ssid ?

[Scott Fella]

If you need help with traffic shaping, you should post your question on the rLAN, Switching and Routing forum:

https://supportforums.cisco.com/community/netpro/network-infrastructure/switching

You can also look for examples by searching Configure 1941 traffic shaping:

http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfgts.html

http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfcbshp.html

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"