error_code='17'

[Raju83]

Hi
We are facing Meraki MR42-44
auth_mode='wpa2-psk' 11k='1' 11v='1' error_code='17' radio='1' vap='0' channel='64' rssi='33'

We have no SD WAN. only cisco meraki and tplink er8411 router. all clients suddenly facing that error 17

1. auth_mode='wpa2-psk' 11k='1' 11v='1' error_code='17' radio='1' vap='0' channel='64' rssi='35'

2. auth_mode='wpa2-psk' 11k='1' 11v='1' error_code='17' radio='1' vap='0' channel='157' rssi='31'

Please give any solution

[rwiesmann]

check this community post

https://community.meraki.com/t5/Wireless/Meraki-MR-Local-Auth-Error-17/m-p/246410

[aleabrahao]

Are 802.11k and 802.11v enabled? If so, try disabling them.

How is the signal to clients?

Are there any interference detected on the network?

I recommend that you open a support case.

[CMR]

31.1.7 has been released and has this fix:

• Clients disconnect with error code 17 (Wi-Fi 6, Wi-Fi 6E, Wi-Fi 7 APs)

[rwiesmann]

@CMR I have also seen this in the rel notes and was wondering if it may be this