EWC 9105

[Ramprasad2]

hi team,

i have AP 9110AXID when i taken console it has EWC and i want convert capwap and join to wlc 9800 how to fix it

[Mark Elsen]

 - FYI : https://www.cisco.com/c/en/us/support/docs/wireless/embedded-wireless-controller-on-catalyst-access-points/215303-embedded-wireless-controller-conversion.html#toc-hId-1622399608

 M.

[Flavio Miranda]

Hi

  The command is "ap-type capwap"

After the message, type y.

AP is the Master AP, system will need a reboot when ap type is changed to CAPWAP
. Do you want to proceed? (y/N) y

[Rich R]

The answer has been given dozens of times and it's in the documentation which could have been found easily with a search!
The bit that people often miss is that the command must be entered at the AP prompt not the EWC/WLC prompt.
To get to the AP prompt from EWC: 

wireless ewc-ap ap shell

https://www.cisco.com/c/en/us/support/docs/wireless/embedded-wireless-controller-on-catalyst-access-points/215303-embedded-wireless-controller-conversion.html#toc-hId--865113225
You may have configured different AP credentials to those used in the example given.