Hi All,
After a little input on this....
Can this scenario work, if so how would you go about it:
The Remote site has a WAN connection to the HQ and a sperate local internet breakout. The WLC and ISE both sit at the HQ and flexconnect APs are located at the Remote site. We want guest users to web authenticate against ISE or even the WLC and once authenticated, only be allowed to use the local broadband internet. Both the WAN and intneret connection are connected via spereate Cisco routers and have seperate vlans on a layer 3 switch that sits in between them. The APs are connected to this switch and are working fine as in it broadcasts the SSIDs we want it to. The query is regarding the Guest authentication method and local switching...
Following something like this ... http://www.drchaos.com/flexconnect-local-switching-guestbyod/ ...... doesnt work as the DHCP is provided by the local internet router and uses a public dns server and so cannot resolve the ISE ip address or name.
I've seen mixed reviews on this so look forward to your responses.
Thanks in advance.
